Cylindrical Connectors

JAEGER Connectors proposes different categories of cylindrical connectors suited to constrained usages : more or less water proofness; dimensions; multiplexing; bearing more or less current intensity; weight; cost ...

Standard Suite
Quick Suite
Water Proof Suite
Hermetic Suite
ATTO Push-Pull Suite
NATTO Push-Pull Suite
Miniature Suite
Industrial Suite

Marine Suite
Robotics Suite
Minex Suite
Power Suite
Thermocouple Suite
Accessories
Assembly note

Standard Suite	Very high quality per price ratio • 6, 9, 12 and 19 contacts Ø1-1,5-2 mm • 3 to 52 contacts, of Ø2-3 and 4 mm • Contacts to be soldered • IP 50, 54 with joint under base • Usage temperature : -40°C up to +100°C • Cord section max : 1,34-3,18-5,26 mm² >> See the catalog for the standard series >> See the assembly notice • Standard series • Water-proof standard series • High voltage series
Quick Suite	Quick locking and unlocking • Locking by a click of 1/6 of turn • 3 to 17 contacts of Ø2-3 and 4 mm • Contacts to be soldered • IP 50, 54 with joint under base • Usage temperature : -40°C up to +100°C • Cord section max : 1,34-3,18-5,26 mm² >> See catalog for quick series >> See the assembly notice • Quick series • Quick series with gilded contacts • Quick series for high voltage
Water Proof Suite	For material that is submited to water projections • Locking by screwing • 3 to 52 contacts of Ø2-3 and 4 mm • Contacts to be soldered • IP 65 with joint under base • Usage temperature : -40°C up to +100°C • Cord section max : 1,34-3,18-5,26 mm² >> See catalog for water proof series >> See the assembly notice • Water proof series • Water proof series with high performances Pg output • Water proof series with Pg output
Hermetic suite	For vacuum, ultra vacuum, for high pressures and for resistance against gaz • Locking by screwing • 3 to 52 contacts of Ø2-3 and 4 mm • Contacts to be soldered • Leakage ratio (with Helium) : 10-9 Atm.cm³/sec • Usage temperature : -50°C up to +125°C • Cord section max : 1,34-3,18-5,26 mm² >> See catalog for hermetic series >> See the assembly notice • Hermetic standard series • Hermetic PNEUROP series • Hermetic ultra-vacuum series
ATTO Push-Pull Suite	Low dimensions and very high density of contacts • Push-Pull locking • 7 to 27 contacts of Ø0,76 mm • Contacts to be soldered or crimped • IP 65 with joint under base • Usage temperature : -40°C up to +100°C • Cord section max : 0,34 mm² >> See catalog of miniature Push-Pull series >> See the assembly notice • Miniature Push-Pull ATTO series
ATTO Push-Pull Suite	Low dimensions and high density of contacts • Push-Pull locking • 3 to 19 contacts of Ø1-1,6 and 2,4 mm • Contacts to be soldered or crimped • IP 65 with joint under base • Usage temperature : -40°C up to +100°C • Cord section max : 0,93-1,50-3,18 mm² >> See catalog of NATTO Push-Pull series >> See the assembly notice • NATTO miniature Push-Pull series • High performances NATTO miniature Push-Pull series
Miniature Suite	High density of contacts • Locking by click of 1/6 of turn • 12 to 55 contacts of Ø1 mm • Contacts to be soldered or crimped • IP 50, 54 and 65 with joint under base • Usage temperature : -40°C up to +100°C • Cord section max : 0,93 mm² >> See catalog of miniature series >> See the assembly notice • Miniature series • Water-proof miniature series • Miniature series with ground contact • Water-proof miniature series with ground contact • Miniature series with wall overcrossing
Industrial Suite	With ground contact bound to the housing (removable) • Locking by click of 1/6 of turn • 3 to 27 contacts of Ø1,6 and 2,4 mm • Contacts to be soldered or crimped • IP 50, 54 and 65 with joint under base • Usage temperature : -40°C up to +100°C • Cord section max : 1,93 ou 3,18 mm² >> See catalog of the industrial series >> See the assembly notice • Industrial series • Industrial water-proof series • Industrial high performance series • Industrial series with 17 blended contacts • Industrial series with wall over-crossing
Marine Suite	Environment with deep immersion • Locking by screwing • 3 to 37 contacts of Ø1-1,6 and 2,4 mm • Contacts to be soldered or crimped • IP 68 • Usage temperature : -40°C up to +100°C • Cord section max : 0,93-1,93-3,18 mm² >> See catalog of marine series/a> >> See the assembly notice • Marine series • Neptunox series
Robotics Suite	Resistance to chocks and vibrations, outputs for large cords • Locking by screwing • 3 to 37 contacts of Ø1-1,6 and 2,4 mm • Contacts to be soldered or crimped • IP 50, 54 with joint under base • Usage temperature : -40°C up to +100°C • Cord section max : 0,93-1,93 et 3,18 mm² >> See catalog of robotics series >> See the assembly notice • Robotics series • Robotics series with 17 blended contacts
Minex Suite	Cheap and light - plastic • Locking by screwing • 3 to 7 contacts of Ø1 mm • Contacts to be soldered or crimped • IP 65 with joint under base • Usage temperature : -40°C up to +85°C • Cord section max : 0,93 mm² >> See catalog for Minex series >> See the assembly notice • Minex series
Power Suite	High intensity up to 300 Ampers continuously • Locking by screwing • 1 to 5 contacts of Ø 1,6 cts pilotes ; 8 and 12 mm • Contacts to be soldered or crimped • IP 50, 54 or 65 with joint under base • Usage temperature : -40°C up to +100°C • Cord section max : 16 ; 25 ; 35 ; 70 ; 90 mm² >> See catalog for power series >> See the assembly notice • Power series
Thermocouple Suite	For temperature measurements • Locking by screwing • 3 to 55 contacts of Ø1-1,6-2-2,4-3 and 4 mm • Contacts to be soldered or crimped • IP 50, 54 , 65 or 68 • Usage temperature : -40°C up to +100°C • Cord section max : 0,93-1,34-1,93-3,18 et 5,26 mm² >> See catalog for thermocouple series >> See the assembly notice • Thermocouple standard series
Accessories	Accessories • Cable clamp, caps, water-proof joints • Muffs, fixing lived and nuts • Base housing, water-proof accessories Conexil • Tip to be soldered, tip with thread Pg • Accessory with lead-locked connectors • Coupling for bare hoses and covered hoses • Extra contacts >> See accessories catalog
Assembly notes	Assembly notes • Assembly • Cabling • Crimping >> See assembly notes